[. . . ] Should the appliance, for instance, have been dropped onto a hard surface, it must not be used any longer: even invisible damage may have adverse effects on the operational safety of the appliance. This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure 4 that they do not play with the appliance. Do not allow the slicer to come into contact with open flames or any hot surface such as hotplates. [. . . ] Positioning the slicer The slicer must be positioned on a flat, solid surface. Locking the base plate Fold the base plate into its horizontal operating position, and then lock it by pushing the slide lock as far as possible in the direction of the hinge. Fitting the sliding tray Hold the sliding tray vertically next to the base plate in such a way that the guide rail on the tray is located underneath the base plate. Pull the tray sideways and upwards so that the rail slips into the guide track underneath the base plate, and then fold the tray 90° upwards to lock it into the track. Setting thickness The thickness of the slices is infinitely adjustable by means of the selection knob. Always bring the stop plate back to its rest (zero) position after use. Safety switch To activate the motor, first press the release button, then the push switch, which will lock in the operating position. As soon as the 5 switch is pressed again, the motor will automatically stop. Slicing Following the above safety instructions, the slicer can now be operated. - Use the right hand to place the food to be sliced on to the sliding tray and to press it against the stop plate. - Fit the end piece holder, with the studded side facing the blade, on to the tray. - Use the left hand to press the release button and, almost simultaneously, the push switch, and then move the sliding tray against the rotating blade. At the same time, press the end piece holder containing the food lightly against the blade. - The end piece holder ensures the food will be held safely while slicing takes place. For safety reasons, always bring the stop plate back to its rest (zero) position after use so that it is flush with the blade. Practical hints - When cutting a loaf of bread where the crust is thicker or harder on the top, it should be placed against the blade in such a way that the firm part of the crust faces the cutting edge. - When cutting cheese, or when cutting very thin slices of other foods, use a slightly moist cloth to wipe the blade first. General cleaning and care General Always remove the plug from the wall socket before detaching any accessories, and before cleaning the appliance. After switching off, always wait until the blade has come to a complete standstill. Bring the stop plate back to its rest (zero) position, so that the blade does not protrude. [. . . ] Guarantee This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. [. . . ]